Solid Plasterer – ANZSCO 333212

Solid Plasterer (ANZSCO 333212) is a skill level 3 occupation assessed by Trades Recognition Australia (TRA) for Australian skilled migration. It is on the MLTSSL list and can be used for subclass 189, subclass 190, subclass 491, subclass 491F, subclass 485, subclass 494, subclass 407. 7 of 8 states and territories currently nominate it.

Open Solid Plasterer in the interactive ANZSCO search · Book a free migration assessment

Quick facts

ANZSCO code: 333212
Skill level: 3 – Certificate IV, or Certificate III with at least 2 years of on-the-job training, or 3 years of relevant experience.
Assessing authority: TRA
Occupation lists: MLTSSL
English test for skills assessment: Not required
ANZSCO unit group: 3332 Plasterers and Renderers

Solid Plasterer job description and duties

Applies decorative and protective coverings of plaster, cement and similar materials to the interiors and exteriors of structures. Registration or licensing may be required.

Also known as: Solid Plasterer

Tasks include

Determining plasterboard layout, and installing insulation and vapour barriers
Measuring, marking and cutting plasterboard, lifting and positioning plasterboard, and securing them to walls, ceilings and battens
Preparing corner beads and securing them in position
Fixing plaster and paper cornices, panel mouldings, ceiling centres and other plaster fittings
Covering joints and screw fixings with wet plaster and sealing compounds, and smoothing them using wet brushes and sandpaper
Mixing and applying coats of plaster, cement and render to structures using trowels, and levelling and smoothing coats to uniform thickness
Plumbing and straightening corners, angles and wall and ceiling surfaces
Creating decorative textures in finishing coats
Applying and finishing acoustic, insulating and fireproofing materials

Education and skill level

Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below. In Australia: AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3) In New Zealand: NZQF Level 4 qualification (ANZSCO Skill Level 3) At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing may be required.

What the assessing authority expects: Trade qualification or apprenticeship plus paid employment in the trade, assessed by TRA.

Visa options for Solid Plasterer

Eligible means the occupation is on a list the visa accepts. You still need to meet every other requirement.

Subclass 189 Skilled Independent: Eligible (via MLTSSL)
Subclass 190 Skilled Nominated: Eligible (via MLTSSL / STSOL)
Subclass 491 Skilled Work Regional – State/Territory nominated: Eligible (via MLTSSL / STSOL / ROL)
Subclass 491F Skilled Work Regional – Family sponsored: Eligible (via MLTSSL)
Subclass 485 Temporary Graduate – Post-Vocational Education Work: Eligible (via MLTSSL)
Subclass 482 Skills in Demand – Core Skills stream: Not eligible (via CSOL)
Subclass 186 Employer Nomination Scheme – Direct Entry: Not eligible (via CSOL)
Subclass 494 Skilled Employer Sponsored Regional – Employer sponsored: Eligible (via MLTSSL / STSOL / ROL)
Subclass 407 Training visa: Eligible (via MLTSSL / STSOL / ROL)

State and territory nomination for Solid Plasterer

7 of 8 states and territories currently list this occupation: New South Wales, Victoria, Queensland, South Australia, Western Australia, Tasmania, Australian Capital Territory. Onshore means already living in that state; offshore means living outside Australia.

New South Wales: 190 Yes, 491 Closed 26–27, onshore NSW residents, offshore Yes. NSW Skills List — unit group 3332.
Victoria: 190 Yes, 491 Not yet open, onshore VIC residents, offshore Yes. All 190-eligible occupations (no state list).
Queensland: 190 Yes, 491 Yes, onshore QLD residents, offshore Yes. Onshore list: 190 & 491; Building & Construction pathway; Offshore QSOL: 190 & 491.
South Australia: 190 Yes, 491 Yes, onshore SA residents, offshore Yes. SA Graduates: 190 & 491; Skilled Employment in SA: 190 & 491; Outer Regional Skilled Employment: 190 & 491; Offshore: 190 & 491.
Western Australia: 190 Yes, 491 Yes, onshore WA & interstate, offshore Yes. General – WASMOL Schedule 2: 190 & 491; Graduate stream (WA study): 190 & 491; Priority WA industry sector.
Tasmania: 190 Yes, 491 Yes, onshore TAS residents, offshore No. Living in Tasmania: Skilled Employment, Graduate or Established Resident pathways; Overseas 491 (OSOP) closed for 2026–27.
Australian Capital Territory: 190 Yes, 491 Yes, onshore Canberra residents, offshore Yes. ACT Nominated Migration Program Occupation List.
Northern Territory: 190 Closed, 491 By exception, onshore NT grads/residents only, offshore No. 491 onshore only, by exception for NT Graduate or Resident applicants with urgent visa or age deadlines.

Based on each state's official 2026–27 lists and program pages. Being listed does not guarantee an invitation.

Skills assessment for Solid Plasterer

TRA assesses trade occupations. Which program you use depends on your passport country and trade. Most applicants use the Migration Skills Assessment (a document-based check). If your passport country is listed against your trade, you must use the Offshore Skills Assessment Program, run by a TRA-approved training organisation, which adds a technical interview and, for licensed trades, a practical test.

The process

Check your program: Use TRA's Pathfinder: MSA, or OSAP if your passport country is listed for your trade.
Gather evidence: Qualification or apprenticeship papers, employer templates and pay evidence for every job.
Apply and pay: MSA through the TRA Online Portal; OSAP through an approved RTO.
Assessment: MSA: documents only (about 120 days). OSAP: documents, then technical interview, then practical if licensed.
Outcome: Outcome letter emailed to you.

What you need for this occupation

Migration Skills Assessment (most applicants): a qualification or apprenticeship directly relevant to the trade, plus paid employment in the trade shown by employer templates and pay evidence. Documents only, no interview.
Offshore Skills Assessment Program (listed passport countries): evidence checked by a TRA-approved training organisation, then a technical interview, plus a practical assessment for licensed trades.

Whether you must use OSAP depends on your passport country and trade. Check TRA's Pathfinder before applying.

Documents checklist

Passport ID page
Qualification certificates and transcripts or apprenticeship papers
TRA Employer Template for each period of employment
Pay evidence for each job (payslips, bank statements, tax records)
Self-employment evidence if applicable

Key facts

MSA fee: AUD 795 (review AUD 610)
MSA processing: About 120 days
Not available through MSA: Electricians, plumbers and air-conditioning mechanics (licensed trades)
Experience: Directly relevant paid employment in the trade is assessed; see TRA guidelines for your program
Validity for visas: Home Affairs generally accepts an assessment for 3 years unless the letter says otherwise

English language requirement

For the TRA skills assessment

No English test required. No English test score is required for the TRA skills assessment. Documents must be in English or translated, and OSAP applicants complete a technical interview. Your English is tested for the visa.

For the visa (189, 190 and 491)

Separately, the visa needs at least Competent English. Minimum scores for tests taken on or after 7 August 2025:

IELTS (Academic or General): Listening 6.0, Reading 6.0, Writing 6.0, Speaking 6.0
PTE Academic: Listening 47, Reading 48, Writing 51, Speaking 54
TOEFL iBT: Listening 16, Reading 16, Writing 19, Speaking 19
OET: Listening 290, Reading 310, Writing 290, Speaking 330

Proficient English adds 10 points and Superior English adds 20 points in the points test.

Related occupations in unit group 3332

Frequently asked questions

What is the ANZSCO code for Solid Plasterer?

The ANZSCO code for Solid Plasterer is 333212. It is a skill level 3 occupation.

Who assesses Solid Plasterer for Australian migration?

Solid Plasterer is assessed by Trades Recognition Australia (TRA). You need a positive skills assessment before you can apply for most skilled visas.

Which Australian visas can a Solid Plasterer apply for?

Solid Plasterer is on the MLTSSL list, so it can be used for: 189 Skilled Independent; 190 Skilled Nominated; 491 Skilled Work Regional – State/Territory nominated; 491F Skilled Work Regional – Family sponsored; 485 Temporary Graduate – Post-Vocational Education Work; 494 Skilled Employer Sponsored Regional – Employer sponsored; 407 Training visa. You must still meet every other visa requirement.

Which states nominate Solid Plasterer?

7 of 8 states and territories currently list Solid Plasterer: New South Wales, Victoria, Queensland, South Australia, Western Australia, Tasmania, Australian Capital Territory. Each state has extra criteria such as residence, employment and points.

Do I need an English test for the Solid Plasterer skills assessment?

No. No English test score is required for the TRA skills assessment. Documents must be in English or translated, and OSAP applicants complete a technical interview. Your English is tested for the visa.

Sources: Australian Bureau of Statistics ANZSCO 2022 (CC BY 4.0), Department of Home Affairs skilled occupation lists, TRA and state and territory nomination pages. Checked November 2026. General information only, not migration advice. Search all ANZSCO occupations.